Aluminium Alloy 5052 Foil

Aluminium alloy 5052 foil has stable product performance and has multiple advantages such as clean degreasing, less holes, good product shape, no deformation during cutting, and good rust prevention effect. The 5052 aluminium foil products are widely used in honeycomb material, door panel material, food container material and other fields. The tempers of aluminium foil 5052 are O, H14, H16, H18, H22, H24, the thickness is 0.03-0.2mm, the width is 100-1700mm.

The aluminum honeycomb core material is a hexagonal honeycomb core made of 3003/5052 aluminium foil, the temper is H18, the thickness of the honeycomb aluminum foil is 0.02~0.08mm, most of which are between 0.04-0.06mm, and the aluminum honeycomb side length models are 5mm, 6mm, 8mm, 10mm , 12mm, etc. The tensile strength of honeycomb aluminium alloy 5052 foil is required to be above 280MPA, and the elongation is about 3%. The product has strict requirements on the shape and thickness of the aluminium foil, and relatively low requirements on the surface of the plate.

Honeycomb aluminium foil is the main material used to make the honeycomb core. At present, paper honeycomb, aluminum honeycomb and plastic honeycomb are mainly used in the market. The honeycomb core is the inner filling of the honeycomb panel. The advantages of aluminum honeycomb panels are high-end new materials that replace aluminum veneer and aluminum-plastic panels. Honeycomb aluminium foil has the advantages of anti-deformation, good sound insulation, heat insulation, and impact resistance.

1, Honeycomb aluminum foil has been widely used in exterior wall decoration of high-rise buildings due to its advantages of light weight, high strength and high rigidity;

2, The honeycomb aluminum foil has low density and light weight, which can greatly reduce the construction load and cost;

3, The middle interlayer of honeycomb aluminum foil contains a lot of air, which can be soundproof, heat insulation, waterproof, moistureproof, heat preservation, and no harmful gas release;

4, The specific strength of aluminium alloy 5052 foil per unit mass is high, the specific stiffness is high, it is not easy to deform, the surface has a very high flatness, and the seismic performance is good.