Categories
- News From Haomei (359)
8079 O aluminum foil is a high-end packaging foil based on an aluminum-iron-silicon alloy. Its high-iron, low-silicon composition ensures superior grain refinement, allowing the material to maintain exceptional plasticity and an extremely low pinhole density—even at thin gauges. This makes it the premier choice for the barrier layer in high-end flexible packaging laminates. Haomei Aluminum has optimized the surface characteristics and performance of aluminium foil for mainstream lamination processes, including dry lamination and solvent-free lamination. 8079 O aluminum foil for lamination is widely used for applications requiring high packaging reliability—such as food, pharmaceuticals, and retort pouches—and is currently supplied to flexible packaging enterprises in over 20 countries.

Specifications and Supply Assurance
Haomei offer 8079 O aluminum foil for lamination thicknesses ranging from 6 μm to 30 μm, with standard specifications including 7 μm, 9 μm, 12 μm, 15 μm, and 20 μm. Widths range from 100 mm to 1,650 mm and can be customized to match the roller width of your lamination equipment. Each coil can weigh up to 2.5 metric tons and comes with a standard 76 mm or 152 mm core, making it compatible with high-speed, continuous production lines. Our entire product line is certified for food contact under FDA 21 CFR and EU 1935/2004 regulations, and it complies with the ASTM B479 standard.
A Dense, Low-Pinhole Structure for Long-Term Barrier Reliability
Pinholes are the primary cause of barrier failure in laminated packaging. In scenarios such as cross-border ocean shipping or storage in high-temperature, high-humidity environments, even microscopic pinholes can lead to moisture ingress or oxidation of the contents. The 8079 alloy utilizes finely dispersed intermetallic compounds to refine the rolled microstructure, effectively minimizing the likelihood of pinhole formation at thin gauges. Haomei 8079 O aluminum foil for flexible packaging features high-precision specifications: a pinhole count of ≤12/m² for 7μm-thick foil, and ≤5/m² for foil 12μm or thicker, with zero through-pinholes exceeding 0.1mm in diameter. The finished foil offers a water vapor transmission rate (WVTR) of ≤0.2g/(m²·24h) and an oxygen transmission rate (OTR) of ≤0.3cm³/(m²·24h·0.1MPa)—delivering a barrier stability that is over 30% superior to that of 8011-alloy foil of the same thickness.
Highly Clean, Homogeneous Surface for Enhanced Lamination Adhesion and Yield
The yield of the lamination process is directly influenced by the surface cleanliness of the aluminum foil; fluctuations in residual oil or the presence of surface precipitates can lead to defects such as pinholes (craters) and delamination. We employ a comprehensive low-residual-oil rolling process, integrated with a three-stage precision filtration system. This ensures that residual oil on the finished surface is consistently controlled to below 2mg/m², with a wetting tension of ≥38mN/m, providing excellent compatibility with polyurethane and acrylate-based adhesives. Following lamination, the peel strength is ≥1.3N/25mm. Even after being subjected to high-temperature retorting at 85°C for 30 minutes, the adhesion retention rate remains ≥85%, with no signs of delamination or blistering.
Mass production data indicates that when using our 8079-O aluminum foil for flexible packaging, the scrap rate resulting from surface defects can be kept within 1.5%—a reduction of more than 2 percentage points compared to standard packaging foils. For a flexible packaging manufacturer with a monthly output of 1,000 tons, this translates to annual material cost savings of hundreds of thousands of dollars.
High Plasticity and Uniform Performance for Diverse Downstream Processing
O-temper (fully annealed) foil undergoes complete recrystallization, resulting in a tensile strength of 80–110 MPa and an elongation at break of ≥22%. With a hardness deviation of ≤5 HV across the entire coil—from the outer wrap to the core—the material offers consistent, uniform performance. During downstream processes such as lamination, pouch making, deep drawing, and folding, the material resists edge cracking, wrinkling, and spring-back. It is ideally suited for various packaging formats, including stand-up pouches, retort pouches, and custom-shaped deep-drawn containers. The material performs reliably across a temperature range of -40°C to 200°C, withstanding extreme conditions like high-temperature retorting and cryogenic freezing without delamination or embrittlement of the packaging structure.
Haomei operate a dedicated production line for 8079 O aluminum foil for lamination with an annual capacity of 15,000 metric tons. Standard specifications can be delivered within 15–20 days; we also support small-batch sampling and customized parameter tuning. For export, our products are packaged using a five-layer vacuum, moisture-proof system designed for long-haul ocean transport. We also provide comprehensive technical support, including guidance on coating compatibility and process parameter optimization. Please contact our sales and technical team to request detailed technical data sheets or free samples.