رقائق الألومنيوم لمكيف الهواء

As the technical lead at Haomei Aluminum responsible for the production of aluminum foil, I know this core component of air conditioning heat exchange systems well. ملكنا احباط زعانف مكيف الهواء, with its precise thickness control of 0.08-0.20mm and tolerance accuracy of ≤±1.5μm, has served over 60 air conditioner manufacturers worldwide, covering residential, commercial, and industrial HVAC fields.

Air conditioner fin aluminum foil is clearly classified according to surface treatment and alloy composition to adapt to different operating conditions.

Uncoated plain/bare aluminum foil uses 1050/1060 pure aluminum or 8011 أشابة, offering significant cost advantages and suitable for basic heat exchange needs in dry and clean environments. ال 8011 plain aluminum foil we provide to small air conditioner manufacturers in Southeast Asia has a consistently high stamping pass rate of over 99.5%.

Hydrophilic coated aluminum foil is our mainstream product. Through a composite treatment of chromium-free passivation and organic hydrophilic coating, the condensate contact angle is reduced to below 25°, eliminating the “water bridging” phenomenon and improving heat exchange efficiency by 5%-15%. It is widely used in residential and commercial air conditioners. Our hydrophilic foil exported to Europe has obtained UL eco-declaration and German Blue Angel certification, with annual exports exceeding 3,000 طن.

Corrosion-resistant coated aluminum foil uses epoxy resin or PVDF composite coatings, achieving salt spray resistance of over 1000 ساعات, suitable for harsh environments such as coastal and chemical plants. Middle Eastern customers report that it extends the lifespan of their air conditioners by 2-3 times.

بالاضافة, our developed hydrophobic aluminum foil, through a special coating, achieves a water droplet contact angle >110°, suitable for low-temperature, high-humidity conditions, and has been applied in heat pump systems in Northern Europe.

The dimensional precision of the fin aluminum foil directly affects the air conditioner’s energy efficiency. We have established a comprehensive standard system covering alloys, سماكة, and condition.

In the alloy system, 1050/1060 pure aluminum has a thermal conductivity of 237 W/(m·K), making it suitable for ultra-thin fins (≤0.08mm) with extremely high thermal conductivity requirements; 3003 aluminum-manganese alloy contains approximately 1.0% المنغنيز, increasing strength by 30% and exhibiting excellent resistance to deformation, making it suitable for high-speed stamping and complex fin shapes, and commonly used in commercial air conditioners; 8011 aluminum-iron alloy combines strength and cost advantages, making it a high-performance choice for residential air conditioners, المحاسبة أكثر 60% of our exports.

Thickness specifications cover 0.08-0.20mm, with 0.10-0.12mm being the mainstream for residential air conditioners, and 0.15-0.20mm suitable for large commercial units. Our four-roll mill can achieve a thickness tolerance of ≤±1.5μm and fin spacing error controlled within ±0.05mm.

In terms of state control, the O-state (fully soft) is suitable for complex stamping, the H22/H24 semi-hard states balance strength and plasticity, and the H26 hard state is suitable for high fin density designs, meeting the needs of different fin structures.

High-quality رقائق الألومنيوم مكيف الهواء must simultaneously meet three core characteristics: الموصلية الحرارية, القابلية للتشكيل, ومقاومة التآكل. We achieve performance breakthroughs through process innovation.

Regarding thermal conductivity, a continuous casting and rolling + 6-7 passes of cold rolling process ensures that the thermal conductivity of 8011 alloy foil remains stable above 220W/(m·K), 3%-5% higher than the industry average. Actual measurements show a 22% reduction in ventilation pressure drop for 0.1mm thick fins.

In terms of formability, precise online annealing temperature control (380-420℃) maintains the aluminum foil elongation at 25%-35%, resulting in no cracks or springback during stamping. Customer feedback indicates a 12% increase in stamping efficiency and a loss rate below 3%.

Corrosion resistance is achieved through chromium-free passivation treatment, with a neutral salt spray test duration exceeding 500 ساعات. Products exported to coastal areas utilize a double-coating process, boosting corrosion resistance to twice the industry average and solving corrosion problems in high-humidity, high-salt environments.

The practical advantages of fin stock aluminum foil are reflected in four dimensions: materials, إنتاج, application, والتكلفة, creating comprehensive value for customers.

At the material level, 8011 alloy offers 40% higher strength than pure aluminum and 15% lower cost than 3003 أشابة, achieving a balance between performance and cost, making it the preferred material for global air conditioning manufacturers.

On the production side, our coil widths cover 100-1300mm, adapting to different fin specifications, using 76mm/152mm standard cores, compatible with mainstream global stamping equipment, reducing roll changedown time by 40%.

In terms of application value, precision-finned aluminum foil improves the energy efficiency ratio (EER) of air conditioners by 8%-12%, saving approximately 150 kWh of electricity per year for a 1.5 HP air conditioner. It meets EU ERP and US Energy Star standards, facilitating the globalization of customer products.

Regarding cost advantages, the ultra-thin design (0.08مم) reduces material usage by 20%. Combined with our large-scale production, our export FOB price is 10%-15% lower than that of Japanese and Korean manufacturers, while guaranteeing a 12-month quality assurance period and providing full lifecycle technical support.

كمؤسسة موجهة للتصدير, our air conditioner fin foil has passed international standard certifications such as EU REACH, RoHS, and US ASTM B209, adapting to the technical specifications of different regions. لسوق أمريكا الشمالية, our chromium-free coated aluminum foil complies with California Proposition 65, resulting in a 25% annual increase in exports. For Middle Eastern customers, we provide special sand and dust resistant coating solutions to address the problem of reduced heat exchange efficiency in air conditioners in desert regions. We have established a technical service team to provide customized services such as fin design optimization and stamping parameter matching. فمثلا, we optimized fin spacing for an African customer, improving energy efficiency by 10% in high-temperature environments.

Haomei Aluminium's احباط زعانف مكيف الهواء, with its combination of precision manufacturing + performance customization + global service, has become a strategic partner for air conditioner manufacturers to enhance product competitiveness. Whether you need a cost-effective solution for residential air conditioners or materials for extreme conditions in industrial heat pumps, we can provide full-process technical support from material selection to mass production, helping your products stand out in the global market.