Embalaje de papel de aluminio para productos farmacéuticos

Aluminium foil packaging pharmaceutical product is represented by 8011 aleación de aluminio, Templado H18 con espesor de 0,02 mm. Al papel de aluminio para envases farmacéuticos de alta calidad., tiene superficie lisa, sin arrugas, sin rasguños, sección ordenada, fuertemente rizado. Dado que el papel de aluminio farmacéutico toca directamente el medicamento comestible importado, el país tiene un alto estándar para la aleación de papel de aluminio medicinal. The requirements for material, surface quality and performance indicators are very strict.

Since the aluminium foil packaging pharmaceutical product is delivered in a hard state, and the rolling of the aluminum foil is carried out in an oil-lubricated environment, the surface of the aluminium foil will inevitably adhere to the rolling oil, so the requirements for the degreasing effect of the rolling mill are higher. Reduce rolling oil pressure and the temperature of the rolling oil are increased to reduce the pass processing rate of the finished papel de aluminio farmacéutica product pass. Reducing the oil pressure and increasing the oil temperature is mainly to reduce the thickness of the oil film and the amount of rolling oil, and the reduction of the pass processing rate of the finished aluminium foil product is to reduce the rolling speed, thereby reducing the temperature of the rolling zone and reducing the thickness of the oil film, y al mismo tiempo, it also reduces the processing speed. Hardening is more pronounced, increasing the strength of aluminium foil.

los embalaje de papel de aluminio farmacéutico with a thickness of 0.25-0.35mm and a hardness of H16 that conforms to the 8011 alloy standard. After rough rolling and intermediate rolling, an aluminum sheet with a thickness of about 0.04mm before double-bonding is obtained. After the inter-coil oiling treatment is carried out, it is transferred to the finishing mill for double-joint finishing. The double-rolled pharmaceutical aluminium foil is cut in the slitting machine according to the delivery specifications and the needs of soft and hard conditions. The aluminum foil delivered in the soft state is annealed, the aluminum foil delivered in the hard state is inspected according to the requirements of surface wetting tension and heat sealing strength value, then packaged and delivered after qualified.